Производственная линия трубы » Производственная линия из ПВХ из четырех труб Производственная линия из ПВХ из четырех труб
Производственная линия из ПВХ из четырех труб
  • PVC Four Pipe Production Line from Blesson machinery
  • PVC Four Pipe Production Line professionally designed extrusion die from Blesson machinery
  • PVC Four Pipe Production Line calibration table from Blesson machinery
  • PVC Four Pipe Production Line swarf-free cutting from Blesson machinery
  • PVC Four-pipe Production Line By Blesson Precision Machinery (2)
  • PVC Four-pipe Production Line By Blesson Precision Machinery
  • PVC Four Pipe Production Line haul-off & cutting combination unit and packaging machine from Blesson machinery
  • Производственная линия из ПВХ из четырех труб

    As a company focusing on research and development, Гуандун Блессон Точность Машины Ко, ООО. attaches great importance to continuous technology improvement and innovation, and always ensures the excellent performance of the equipment launched in the market. Due to small profit margins and fierce competition in the market for small-diameter PVC pipes, it is particularly important to reduce the production cost through the design of the production line. Blesson PVC Four pipe production line can effectively save the customer's floor space, reduce the energy loss and labor costs, и так далее., thereby increasing the product's gross profit margin and increasing market competitiveness. With advanced design and stable performance, our four-strand PVC pipe production line guarantees high output and fast production line speed, which is suitable for different material formulas. The pipes produced by Blesson PVC Four-pipe production line are ranging from Ø16 mm to Ø32 mm, which are widely used for conduit, electrical cable protection, and urban wire laying.

    • описание

    PVC Four Pipe Production Line from Blesson machinery

    • Применение продукции

    • These PVC pipes are with excellent insulation performance, strong impact resistance, good resistance to fire, moisture, acid, and alkali, suitable for the electrical casing, cable protection, water drainage, Др.
      Excellent insulation performance PVC pipes from Blesson machinery

      Excellent insulation performance PVC pipes from Blesson machinery

      Strong impact resistance PVC pipes from Blesson machinery

      Strong impact resistance PVC pipes from Blesson machinery

    • Product Technology Highlights

    • The four-strand PVC pipe production line produced by Guangdong Blesson Precision Machinery Co., ООО. adopts a high-output and efficient conical twin-screw extruder, a professionally designed extrusion die, a powerful cooling calibration unit, and a haul-off and cutting combination unit. It features stable extrusion, comprehensive configuration, mature and leading design, and high production efficiency.
    • The electronic components of Blesson’s four-strand PVC pipe production line are from worldwide famous brands like Siemens and ABB, which ensures the stability of the production line and prolongs its service life.
    • Users can choose manual control or Siemens S7-1200 series PLC control according to actual needs. The manual control system is controlled by independent thermometers, which are simple to operate and easy to maintenance. The Siemens S7-1200 series PLC control system is equipped with a 12-inch touchable screen with frequently used manual shortcut buttons that can be operated with heat-resistant gloves on. Customers will get benefits from its powerful function, strong practicability, and user-friendly design.
    • экструдер:

    • Blesson’s four-strand PVC pipe production line is equipped with an energy-saving and high-efficient conical twin-screw extruder. The extruder can plasticize the material at a lower temperature with stable performance. With a quantitative feeding system, variable frequency speed regulation, the extruder can fulfill different needs of output requirements.

      PVC Four Pipe Production Line high-efficient conical twin screw extruder from Blesson machinery

      PVC Four Pipe Production Line high-efficient conical twin-screw extruder from Blesson machinery

    • The scientific and reasonable design of the screws can adapt various PVC formulas to meet the different needs of our customers. Made of nitrided alloy steel (38CrMoALA), and with nitriding and polish treatment, the screw ensures the plasticizing effect with high strength and wearing resistance.

      PVC Four Pipe Production Line screw from Blesson machinery

      PVC Four Pipe Production Line screw from Blesson machinery

    • Экструзионные матрицы:

    • The four-strand PVC pipe extrusion dies designed by Blesson have a smooth flow channel to ensure uniform extrusion of the material along the flow channel. To avoid overheating and decomposition of the material, our design can reduce the residence time of the material and improve the plasticizing and blending effect. Our PVC four-pipe extrusion die transfers the heat evenly, which results in a good molding effect. Precise machining can effectively avoid any leakage. The bushes, Контакты, and calibrators of the extrusion die can be replaced easily for different sizes while sharing the same die head and distributor.
      PVC Four Pipe Production Line extrusion die from Blesson machinery

      PVC Four Pipe Production Line extrusion die from Blesson machinery

      PVC Four Pipe Production Line professionally designed extrusion die from Blesson machinery

      PVC Four Pipe Production Line professionally designed extrusion die from Blesson machinery

    • Калибровочный стол:

    • The calibration table is made of SUS304 stainless steel with superb corrosion resistance, firmness, и длительный срок службы.
    • It is easy to adjust the vacuum setting for each independent workstation.
    • The efficient water immersion cooling ensures the quality of the pipe under a high production speed.
    • The movable control panel of the calibration table provides convenience for the commissioning, startup, and maintenance of the production line.
      PVC Four Pipe Production Line movable control panel of the calibration table from Blesson machinery

      PVC Four Pipe Production Line movable control panel of the calibration table from Blesson machinery

      PVC Four Pipe Production Line high-quality calibration table from Blesson machinery

      PVC Four Pipe Production Line high-quality calibration table from Blesson machinery

      PVC Four Pipe Production Line calibration table from Blesson machinery

      PVC Four Pipe Production Line calibration table from Blesson machinery

    • Вывоз & Cutting Combination Unit:

    • In order to assure prompt cutting dynamic response during high-speed production, the swarf-free cutting is directly driven by a DD motor instead of a traditional AC motor. Without the burden of the weight of a traditional motor, this haul-off & cutting combination unit can ensure smooth cutting edge and precise cutting length for both thick pipe and thin pipe at high speed.
    • To guarantee synchronization and stability, the haul-off unit adopts a high-quality permanent magnet synchronous motor and speed reducer.
    • The whole unit is fully enclosed to ensure the safety of the operators.
    • The Siemens PLC touch screen control with frequently used mechanical buttons on the control panel provides a friendly and easy control and setting mode.
      PVC Four Pipe Production Line haul-off & cutting combination unit from Blesson machinery

      PVC Four Pipe Production Line haul-off & cutting combination unit from Blesson machinery

      PVC Four Pipe Production Line haul-off unit from Blesson machinery

      PVC Four Pipe Production Line haul-off unit from Blesson machinery

      PVC Four Pipe Production Line swarf-free cutting from Blesson machinery

      PVC Four Pipe Production Line swarf-free cutting from Blesson machinery

    • According to customer needs, it can be equipped with an automatic belling machine or an automatic bundling and packaging machine.
      PVC Four Pipe Production Line automatic bundling and packaging machine from Blesson machinery

      PVC Four Pipe Production Line automatic bundling and packaging machine from Blesson machinery

      PVC Four Pipe Production Line haul-off & cutting combination unit and packaging machine from Blesson machinery

      PVC Four Pipe Production Line haul-off & cutting combination unit and packaging machine from Blesson machinery

    • Список моделей продуктов

    Производственная линия из ПВХ из четырех труб
    линия Модели Диаметр диапазона (мм) выталкиватьР Модели Max. Выход (кг/ч) Длина линии (м) Общая мощность установки(кW) В) замечаниесекунда
    BLS-32FPVC 16-32 BLE65-132 280 20 90 четыре трубы
    BLS-32FPVC 16-32 BLE80-156 480 20 150 четыре трубы
    BLS-32FPVC 16-32 BLE65-132G 450 20 100 четыре трубы
    • Гарантия, сертификат соответствия

    Гуандун Блессон Точность Машины Ко, ООО. обеспечивает гарантийное обслуживание сроком на один год. Во время использования продукта, если у вас есть какие-либо вопросы о продукте, Вы можете напрямую связаться с нами для профессионального послепродажного обслуживания.

    Гуандун Блессон Точность Машины Ко, ООО. предоставляет квалификационные сертификаты продукции для каждого продаваемого продукта, обеспечение того, чтобы каждый продукт был проверен профессиональными техническими специалистами и отладчиками.

    PVC Four Pipe Production Line product certificate from Blesson machinery

    PVC Four Pipe Production Line product certificate from Blesson machinery

    • Профиль компании

    Гуандун Блессон Точность Машины Ко, ООО. является высокотехнологичным предприятием, специализирующимся на исследованиях и разработках, производство, сбытовой, и сервис оборудования для экструзии пластмасс, оборудование для производства литых пленок, и оборудование автоматизации.

    сейчас, наша продукция продается по всей стране и продается во многие зарубежные страны и регионы. Наша высококачественная продукция и искреннее обслуживание завоевали похвалу и доверие многих клиентов.

    Гуандун Блессон Точность Машины Ко, ООО. последовательно прошел международный GB/T19001-2016/IS09001:2015 сертификация системы менеджмента качества, Сертификация CE, и так далее., и был удостоен почетных званий «Известный бренд Китая» и «Китайский независимый инновационный бренд».

    Сертификат высокотехнологичной экспертизы от Blesson Precision Machinery

    Сертификат высокотехнологичной экспертизы от Blesson Precision Machinery

    Сертификат CE линии выдувных тканей и сертификат системы менеджмента качества

    Сертификат CE и GB/T19001-2016/IS09001:2015

    Независимые инновационные продукты Китая и известные бренды в Китае

    Независимые инновационные продукты Китая и известные бренды в Китае

    Патентные свидетельства на полезную модель от Blesson machinery

    Патентные свидетельства на полезную модель от Blesson machinery, Китайский экструдер

     

    Поделиться с:

    , , , , , , , , , , , , , , , , , , , , , , , , , , , ,

    Форма запроса ( мы свяемся с вами как можно скорее )

    имя:

    Название компании:

    Отправить по электронной почте:

    Сообщение:

    проверка: 2 + 3 = ?

    МОЖЕТ БЫТЬ, ВАМ НРАВИТСЯ ТАКЖЕ

    Услуги
    Благослови мир и процветание через нашу преданность.