Ligne de production de tuyaux » Ligne de production à quatre tuyaux en PVC Ligne de production à quatre tuyaux en PVC
Ligne de production à quatre tuyaux en PVC
  • PVC Four Pipe Production Line from Blesson machinery
  • PVC Four Pipe Production Line professionally designed extrusion die from Blesson machinery
  • PVC Four Pipe Production Line calibration table from Blesson machinery
  • PVC Four Pipe Production Line swarf-free cutting from Blesson machinery
  • PVC Four-pipe Production Line By Blesson Precision Machinery (2)
  • PVC Four-pipe Production Line By Blesson Precision Machinery
  • PVC Four Pipe Production Line haul-off & cutting combination unit and packaging machine from Blesson machinery
  • Ligne de production à quatre tuyaux en PVC

    As a company focusing on research and development, Guangdong Blesson Precision Machinery Co., Ltée. attaches great importance to continuous technology improvement and innovation, and always ensures the excellent performance of the equipment launched in the market. Due to small profit margins and fierce competition in the market for small-diameter PVC pipes, it is particularly important to reduce the production cost through the design of the production line. Blesson PVC Four pipe production line can effectively save the customer's floor space, reduce the energy loss and labor costs, etc., thereby increasing the product's gross profit margin and increasing market competitiveness. With advanced design and stable performance, our four-strand PVC pipe production line guarantees high output and fast production line speed, which is suitable for different material formulas. The pipes produced by Blesson PVC Four-pipe production line are ranging from Ø16 mm to Ø32 mm, which are widely used for conduit, electrical cable protection, and urban wire laying.

    • description

    PVC Four Pipe Production Line from Blesson machinery

    • Applications des produits

    • These PVC pipes are with excellent insulation performance, forte résistance aux chocs, bonne résistance au feu, humidité, acide, et alcalin, convient au boîtier électrique, protection des câbles, drainage de l’eau, etc.
      Excellent insulation performance PVC pipes from Blesson machinery

      Excellent insulation performance PVC pipes from Blesson machinery

      Strong impact resistance PVC pipes from Blesson machinery

      Strong impact resistance PVC pipes from Blesson machinery

    • Product Technology Highlights

    • The four-strand PVC pipe production line produced by Guangdong Blesson Precision Machinery Co., Ltée. adopts a high-output and efficient conical twin-screw extruder, a professionally designed extrusion die, a powerful cooling calibration unit, and a haul-off and cutting combination unit. It features stable extrusion, comprehensive configuration, mature and leading design, and high production efficiency.
    • The electronic components of Blesson’s four-strand PVC pipe production line are from worldwide famous brands like Siemens and ABB, which ensures the stability of the production line and prolongs its service life.
    • Users can choose manual control or Siemens S7-1200 series PLC control according to actual needs. The manual control system is controlled by independent thermometers, which are simple to operate and easy to maintenance. The Siemens S7-1200 series PLC control system is equipped with a 12-inch touchable screen with frequently used manual shortcut buttons that can be operated with heat-resistant gloves on. Customers will get benefits from its powerful function, strong practicability, and user-friendly design.
    • extrudeuse:

    • Blesson’s four-strand PVC pipe production line is equipped with an energy-saving and high-efficient conical twin-screw extruder. The extruder can plasticize the material at a lower temperature with stable performance. With a quantitative feeding system, variable frequency speed regulation, the extruder can fulfill different needs of output requirements.

      PVC Four Pipe Production Line high-efficient conical twin screw extruder from Blesson machinery

      PVC Four Pipe Production Line high-efficient conical twin-screw extruder from Blesson machinery

    • The scientific and reasonable design of the screws can adapt various PVC formulas to meet the different needs of our customers. Made of nitrided alloy steel (38CrMoALA), and with nitriding and polish treatment, the screw ensures the plasticizing effect with high strength and wearing resistance.

      PVC Four Pipe Production Line screw from Blesson machinery

      PVC Four Pipe Production Line screw from Blesson machinery

    • Matrice d’extrusion:

    • The four-strand PVC pipe extrusion dies designed by Blesson have a smooth flow channel to ensure uniform extrusion of the material along the flow channel. To avoid overheating and decomposition of the material, our design can reduce the residence time of the material and improve the plasticizing and blending effect. Our PVC four-pipe extrusion die transfers the heat evenly, which results in a good molding effect. Precise machining can effectively avoid any leakage. The bushes, Broches, and calibrators of the extrusion die can be replaced easily for different sizes while sharing the same die head and distributor.
      PVC Four Pipe Production Line extrusion die from Blesson machinery

      PVC Four Pipe Production Line extrusion die from Blesson machinery

      PVC Four Pipe Production Line professionally designed extrusion die from Blesson machinery

      PVC Four Pipe Production Line professionally designed extrusion die from Blesson machinery

    • Table d’étalonnage:

    • The calibration table is made of SUS304 stainless steel with superb corrosion resistance, firmness, et longue durée de vie.
    • It is easy to adjust the vacuum setting for each independent workstation.
    • The efficient water immersion cooling ensures the quality of the pipe under a high production speed.
    • The movable control panel of the calibration table provides convenience for the commissioning, startup, and maintenance of the production line.
      PVC Four Pipe Production Line movable control panel of the calibration table from Blesson machinery

      PVC Four Pipe Production Line movable control panel of the calibration table from Blesson machinery

      PVC Four Pipe Production Line high-quality calibration table from Blesson machinery

      PVC Four Pipe Production Line high-quality calibration table from Blesson machinery

      PVC Four Pipe Production Line calibration table from Blesson machinery

      PVC Four Pipe Production Line calibration table from Blesson machinery

    • Transport & Cutting Combination Unit:

    • In order to assure prompt cutting dynamic response during high-speed production, the swarf-free cutting is directly driven by a DD motor instead of a traditional AC motor. Without the burden of the weight of a traditional motor, this haul-off & cutting combination unit can ensure smooth cutting edge and precise cutting length for both thick pipe and thin pipe at high speed.
    • To guarantee synchronization and stability, the haul-off unit adopts a high-quality permanent magnet synchronous motor and speed reducer.
    • The whole unit is fully enclosed to ensure the safety of the operators.
    • The Siemens PLC touch screen control with frequently used mechanical buttons on the control panel provides a friendly and easy control and setting mode.
      PVC Four Pipe Production Line haul-off & cutting combination unit from Blesson machinery

      PVC Four Pipe Production Line haul-off & cutting combination unit from Blesson machinery

      PVC Four Pipe Production Line haul-off unit from Blesson machinery

      PVC Four Pipe Production Line haul-off unit from Blesson machinery

      PVC Four Pipe Production Line swarf-free cutting from Blesson machinery

      PVC Four Pipe Production Line swarf-free cutting from Blesson machinery

    • According to customer needs, it can be equipped with an automatic belling machine or an automatic bundling and packaging machine.
      PVC Four Pipe Production Line automatic bundling and packaging machine from Blesson machinery

      PVC Four Pipe Production Line automatic bundling and packaging machine from Blesson machinery

      PVC Four Pipe Production Line haul-off & cutting combination unit and packaging machine from Blesson machinery

      PVC Four Pipe Production Line haul-off & cutting combination unit and packaging machine from Blesson machinery

    • Liste des modèles de produits

    Ligne de production à quatre tuyaux en PVC
    ligne modèle Gamme de diamètre (mm) extruderR modèle max. Sortie(kg/h) Longueur de la ligne(m) Puissance totale d’installation(KW) remarques
    BLS-32FPVC 16-32 BLE65-132 280 20 90 quatre tuyaux
    BLS-32FPVC 16-32 BLE80-156 480 20 150 quatre tuyaux
    BLS-32FPVC 16-32 BLE65-132G 450 20 100 quatre tuyaux
    • Garantie, certificat de conformité

    Guangdong Blesson Precision Machinery Co., Ltée. fournit un service de garantie d’un an. Pendant l’utilisation du produit, si vous avez des questions sur le produit, vous pouvez nous contacter directement pour un service après-vente professionnel.

    Guangdong Blesson Precision Machinery Co., Ltée. fournit des certificats de qualification de produit pour chaque produit vendu, s’assurer que chaque produit a été inspecté par des techniciens et des débogueurs professionnels.

    PVC Four Pipe Production Line product certificate from Blesson machinery

    PVC Four Pipe Production Line product certificate from Blesson machinery

    • Profil de l’entreprise

    Guangdong Blesson Precision Machinery Co., Ltée. est une entreprise de haute technologie spécialisée dans la recherche et le développement, production, ventes, et service de machines d’extrusion de plastique, équipement de production de films moulés, et équipement d’automatisation.

    Actuellement, nos produits sont vendus dans tout le pays et vendus dans de nombreux pays et régions d’outre-mer. Nos produits de haute qualité et notre service sincère ont gagné les éloges et la confiance de nombreux clients.

    Guangdong Blesson Precision Machinery Co., Ltée. a successivement passé le GB/T19001-2016/IS09001 international:2015 certification du système de gestion de la qualité, Certification CE, etc., et a reçu les titres honorifiques de « China Famous Brand » et « China Independent Innovation Brand ».

    Certificat d’expertise de haute technologie par Blesson Precision Machinery

    Certificat d’expertise de haute technologie par Blesson Precision Machinery

    Certificat CE de la ligne de tissu soufflé à l’état fondu et certificat du système de gestion de la qualité

    Certificat CE et GB/T19001-2016/IS09001:2015

    Produits d’innovation indépendants en Chine et marques célèbres en Chine

    Produits d’innovation indépendants en Chine et marques célèbres en Chine

    Certificats de brevet de modèle d’utilité de Blesson machinery

    Certificats de brevet de modèle d’utilité de Blesson machinery, Extrudeuse chine

     

    Partager avec:

    , , , , , , , , , , , , , , , , , , , , , , , , , , , ,

    Formulaire de demande de renseignements ( nous vous revenons dans les plus brefs délais )

    Nom:

    Nom de l’entreprise:

    Messagerie électronique:

    Message:

    Vérification: 1 + 7 = ?

    PEUT-ÊTRE QUE VOUS AIMEZ AUSSI

    Service
    Bénissez le monde avec la paix et la prospérité grâce à notre dévouement.