Product Overview
The push-pull rod + micrometer adjustment die head is achieved by adding a push- pull rod adjustment mechanism to the lower die and a micrometer adjustment mechanism to the upper die . Both the upper die and the lower die can be adjusted for lateral consistency. The adjustment window is large and the first inspection pass time is fast.
Product components
| Serial number | Structure Name | Functions/Features | Material | Dispensing method | Adjustment method |
| 1 | Upper die | Die body | Optional | Injection valve + die dispensing channel + shims guide | Upper die differential head + T block interception, lower die lip deformation |
| 2 | Lower die | Die body | Optional |
| 3 | shims | Coating accessories | SUS304 |
| 4 | Hinge | Flip the upper die | SUS304 |
| 5 | Feed port | Fluid input port | SUS304 |
| 6 | Ladder Block | Alignment of upper and lower die lips | SUS304 |
| 7 | Injection valve | Glue dispensing interface | SUS304 |
| 8 | Micrometer module | Adjust the T-block position | SUS304 |
| 9 | T Block | Adjusting lateral consistency | SUS304 |
| 10 | Pressure plate | Fixed shims + balanced cavity pressure | SUS304 |
| 11 | Locating pins | Positioning shims | SUS304 |
| 12 | Putter | Adjusting lateral consistency | SUS304 |
| 13 | Tie rod | Adjusting lateral consistency | SUS304 |
| 14 | Clamping screw | Upper and lower mold fastening | SUS304 |
Features
- Customizable lip design
- Customized cavity design possible
- Customized installation design available
- Micrometer quantitative adjustment, простое управление
- Online upgradeable fully automatic closed-loop coating solution
- Independent dispensing channel
- Short first inspection and adjustment time
Размеры
Die head length L: ≤2000mm
Die width W:
①L≤1100mm, W is recommended to be 155mm (customizable)
②L＞1100mm, W is recommended to be 195mm (customizable)
Die head lower die height: conventional 70mm (can be customized according to the equipment busbar height)
Selection Method
| 1 | Adjustment method | Push rod/pull rod, micrometer adjustment (online upgrade closed loop) |
| 2 | Die length | ≤2000mm |
| 3 | Dispensing channel | Independent flow channel |
| 4 | Flatness | ≤3μm |
| 5 | Straightness | ≤3μm |
