Slot Dies|Slot Dies For Coating|Fully Automatic Closed-Loop Double-Layer Slot Die
As a wet precision slit coating technology, the fully automatic double-layer coating die has the following working principle: the fluid conducted by the vector pump is transferred to the current collector along the slit of the coating die under a certain pressure and flow rate.
As a wet precision slit coating technology, the fully automatic double-layer coating die has the following working principle: the fluid conducted by the vector pump is transferred to the current collector along the slit of the coating die under a certain pressure and flow rate. Two different active substances or slurries can be coated on the same surface at the same time in a wet film state . The upper and lower layers are independently controlled and closed-loop adjusted through the data fed back by the surface density meter, which can meet the requirements of double-layer continuous and double-layer gap coating. Both the upper and lower layers are adjusted by micrometers.
Product Components
Serial number
Structure Name
Functions/Features
مادي
Dispensing method
Adjustment method
1
Upper die
Die body
Optional
Injection valve + die dispensing channel + shims guide
ميكرومتر + T-block interception
2
Middle mold
Die body
Optional
3
Lower die
Die body
Optional
4
Upper shims
Coating accessories
SUS304
5
Lower shims
Coating accessories
SUS304
6
Hinge
Flip the upper die
SUS304
7
Upper feed port
Fluid input port
SUS304
8
Lower feed inlet
Fluid input port
SUS304
9
Upper ladder block
Upper and middle die lip alignment
SUS304
10
Lower ladder block
Alignment of middle and lower die lips
SUS304
11
Injection valve
Glue dispensing interface
SUS304
12
Upper executive body
Adjust the T-block position
SUS304
13
Lower level executive agency
Adjust the T-block position
SUS304
14
Upper T Block
Adjusting lateral consistency
SUS304
15
Lower T block
Adjusting lateral consistency
SUS304
16
Pressure plate
Fixed shims + balanced cavity pressure
SUS304
17
Locating pins
Positioning shims
SUS304
18
Upper mold screw
Upper and middle mold fastening
SUS304
19
Lower mold screw
Middle and lower die fastening
SUS304
Features
1.Customizable lip design
2.Customized cavity design possible
3.Customized installation design available
4.Compatible with single-layer coating
5.Can achieve double-layer continuous and gap coating
6.Can realize closed-loop adjustment in TD and MD directions
